Product
Product Overview
What is RPM?
Intelligent Remote Power Management of rack level hardware (servers, routers, modems and telephone networks) allows you to control critical power with the security of knowing your investment is protected. With a POWERmate (PM-208N) solution you can be alerted via e-mail messages, SMS pager messages and SNMP traps, to respond to problems immediately to minimize or eliminate downtime.
POWERmate?
The POWERmate (PM-208N) is an internet ready device designed to allow network administrators remote and individual control of AC power for up to eight devices directly, or scalable up to 128 devices via daisy chaining (cascading).
Remote Power Recycling - Reboot from Anywhere!
Monitor, control and reboot servers and other connected devices remotely using standard protocols such as single dial-up, SNMP, Telnet and Web. So even if the network locks up there is always a back up control option for administrators.
Remote Temperature and Humidity Sensing
The intelligent POWERmate (PM-208N) includes optional ambient temperature sensing capability. It can monitor and report an over-temperature condition, reducing the risk of equipment damage.
Features
- Eliminates rack level power issues
- Enterprise cost control measure - saves downtime and costly onsite visits
- Turn ON/OFF any AC powered device via standard protocols - single dial-up,SNMP, Telnet and Web
- Dual 15-AMP circuits
- Integral 10/100Base-T Ethernet port Address-Specific IP security masks prevent unauthorized sources from accessing the PM-208N menu through the network
- Supports NMS for control via MIB - users can use MIB to develop their application interface
- Downloads data and events log list to servers
- Daisy Chain expandable up to 16 units or 128 devices
- Event notification by email, SMS pager messages and trap according to preset conditions
- Allows users to configure power on/off sequences for each outlet - helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads
- Sequencing schedules allow users to predetermine what equipment is turned on first so other equipment dependant on that unit will function properly
- Supports Windows 2000, XP and 2003 - for safe shutdowns and rebooting
- Can be attached to a temperature and humidity sensor to protect equipment
- Supports API - users can develop their own control interface
Specifications
| Model | JC-PM208N (POWERmate) |
| SNMP Interface | |
| Ethernet | 1 X RJ45, 10/100Mbps |
| ENV | RJ11, Environment Detection |
| Modem | 1 X RS232 |
| Power management interface | |
| iLink/TEL connector | 2 X RJ11, Input(1)/Output(1) |
| NT connector/Trigger Signal Output | 8 X RJ11 |
| RPM Push button | 1 X Main power on / off 8 X Sub power on/off. |
| Power Output | 8 X NEMA 5-15R |
| Power Input | 2 X NEMA 5-15R to IEC320P |
| Operation and Storage parameters: | |
| Power Outlet | 110(220)VAC |
| Frequency (HZ) | 50 - 60 HZ |
| Output current (max) | 15Amp X 2 |
| Dimensions (H x W x D) | 44(1.7') X 431.5(17') X 162.5(6.4') mm |
| Weight | 5.5 lb / 2.5kgs |